Enerac-500 Gas Analyzer |
|||
Specification |
|||
Physical |
|||
Case |
9.75” x 4” x 2.75” Aluminum case with |
||
Magnetic support |
|||
Weight |
3 lbs. |
||
Probe |
9” L x 3.8” OD ( other lengths available ) Inconel steel stack probe. Probe housing connects to instrument via a 10 ft. Viton hose ( other lengths available ) and water trap and thermoelectric condenser. Maximum continuous temperature: 2000 F. |
||
Electrical Power |
|||
Battery |
4-6 VDC. Rechargeable NiMH (included) or 4 disposable AA alkaline cells. Approx. 6-8 hours operating time (1.5 hours with T’cooler) |
||
AC Charger |
120/240v. 60/50 hz. 9vdc output |
||
Display |
Four line by 16 character Liquid Crystal Display with backlight illumination. |
||
Printer |
Internal 2” thermal printer. |
||
Data Storage |
|||
Internal |
400 individually selectable buffers hold one complete set of measurements each in non-volatile memory. Buffer contents can be sent to printer or serial port. Data is stored by pressing the STORE key or automatically on a periodic basis |
||
Communications |
|||
Serial Port ( RS-232C port ) settings |
9600,N,8,1 USB Port Bluetooth Wireless ( Class 1 – 100 m ) |
||
Fuels |
|||
15 Fuels |
#2 Oil, #4 Oil, #6 Oil, Natural Gas, Anthracite, Bituminous, Lignite, Wood ( 50% H₂O ), Wood ( 0% H₂O ), Kerosene, Propane, Butane, Coke Oven Gas, Blast Furnace & Sewer Gas. Custom fuels available on request or by customer programming using ENERCOM software |
||
Measured Parameters |
Range |
Resolution |
Accuracy |
Ambient Temp. Type RTD |
0-150˚F |
1˚F or C |
+/- 2˚F M |
Stack Temp. ( Net ) |
0-2000˚F (1100˚C) |
1˚F or C |
+/- 2˚F M |
Type K Thermocouple |
|||
Oxygen ( O₂ ) |
0-25% |
0.1% |
+/- 0.2% M |
Electrochemical Cell |
|||
Carbon Monoxide ( CO ) |
0-500 |
1 PPM |
+/- 0.2% M** |
Electrochemical Cell |
0-2000 or |
||
0-20000PPM |
|||
Nitric Oxide ( NO ) |
0-300 |
0.1 PPM |
+/- 0.2% M** |
Electrochemical Cell |
0-2000 or |
1 PPM |
|
0-4000 PPM |
1 PPM |
||
Nitrogen Dioxide ( NO₂ ) |
0-500 or |
0.1 PPM |
+/- 0.2% M** |
Electrochemical Cell |
0-1000 PPM |
1 PPM |
|
Sulfur Dioxide ( SO₂ ) |
0-2000 PPM |
1 PPM |
+/- 0.2% M** |
Elecrochemical Cell |
|||
Combustibles |
0-5% |
0.1% |
+/- 0.2%(CH4)M |
Catalytic Sensor |
|||
Stack Draft |
+10” to 40” WC |
0.1˚ WC |
+/- 0.2% M |
Smoke Test |
ASTMD method D2156 |
||
Measured Parameters |
Range |
Resolution |
Accuracy |
Combustion Efficiency |
0-100% |
0.1% |
+/- 1% |
Carbon Dioxide ( CO₂ ) |
0-40% |
0.1% |
+/- 2% |
Excess Air |
0-1000% |
1% |
+/- .2% |
Oxides Of Nitrogen ( NOx ) |
0-800 |
|
+/- 4% |
0-3000 |
0.1 PPM |
||
0-5000 PPM |
1 PPM |
||
or other |
1 PPM |
||
Pounds / Million Btu |
0-99.99 #/mBtu |
0.01 #/B |
+/- 2% |
( CO, NO, NO₂, S0₂ ) |
|||
Grams / Brake-HP-HR ( CO, NO, NO₂, SO₂ ) |
0-99.99/bhp-hr |
0.01g/bhp-hr |
+/- 2% |