Control of standard components |
ControlCOCKPIT |
: |
adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays |
Temperature |
: |
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
Timer |
: |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Temperature |
Set temperature range in °C |
: |
min. 5°C above ambient up to +300°C |
|
: |
resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED) |
Control technology |
adjustable parameters |
: |
temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime |
Function SetpointWAIT |
: |
the process time does not start until the set temperature is reached |
Language setting |
: |
German/English/Spanish/French |
Calibration |
: |
three freely selectable temperature values |
Ventilation |
natural convection |
|
|
Fresh air admixture |
: |
adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually |
Vent |
: |
vent connection with restrictor flap |
Communication |
Programming |
: |
AtmoConTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port |
documentation |
: |
programme stored in case of power failure |
Safety |
Alarm |
: |
visual and acoustic |
Temperature control |
: |
overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display |
AutoSAFETY |
: |
additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
Temperature control |
: |
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
Autodiagnostic system |
: |
for fault analysis |
Standard equipment |
Door |
: |
fully insulated stainless steel door with2-point locking ( compression door lock ) |
Internals |
: |
1 stainless steel grid |
Scope of delivery |
: |
incl. works calibration certificate for +160°C |
Housing |
: |
rear zinc-plated steel |
Interior |
: |
easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
Oven UN30 Plus |
Stainless steel interior |
Dimensions W x H x D in mm |
: |
w(A) x h(B) x d(C): 400 x 320 x 250 mm |
Volume |
: |
32 Liter |
Max. loading of chamber |
: |
60 kg |
Textured stainless steel casing |
: |
w(D) x h(E) x d(F): 585 x 704 x 434 mm |
Electrical data |
Voltage |
: |
230 V, 50/60 Hz |
Electrical load |
: |
approx. 1600 W |
Voltage |
: |
115 V, 50/60 Hz |
Electrical load |
: |
approx. 1600 W |
Dimensions approx incl. carton |
: |
B x H x T: 660 x 890 x 650 mm |
Gross weight carton |
: |
approx. 61 kg |
Oven UN55 Plus |
Stainless steel interior |
Max. loading of chamber |
: |
80 kg |
Dimensions W x H x D in mm |
: |
w(A) x h(B) x d(C): 400 x 400 x 330 mm |
Volume |
: |
53 Liter |
Textured stainless steel casing |
: |
w(D) x h(E) x d(F): 585 x 784 x 514 mm |
Electrical data |
Voltage |
: |
230 V, 50/60 Hz |
Electrical load |
: |
approx. 2000 W |
Voltage |
: |
115 V, 50/60 Hz |
Electrical load |
: |
approx. 1700 W |
Dimensions approx incl. carton |
: |
B x H x T: 730 x 950 x 670 mm |
Net weight |
: |
approx. 57 kg |
Gross weight carton |
: |
approx. 76 kg |
Oven UN75 Plus |
Stainless steel interior |
Max. loading of chamber |
: |
120 kg |
Dimensions W x H x D in mm |
: |
w(A) x h(B) x d(C): 400 x 560 x 330 mm |
Volume |
: |
74 Liter |
Textured stainless steel casing |
: |
w(D) x h(E) x d(F): 585 x 944 x 514 mm |
Electrical data |
Voltage |
: |
230 V, 50/60 Hz |
Electrical load |
: |
approx. 2500 W |
Voltage |
: |
115 V, 50/60 Hz |
Electrical load |
: |
approx. 1800 W |
Dimensions approx incl. carton |
: |
B x H x T: 730 x 1130 x 670 mm |
Net weight |
: |
approx. 66 kg |
Gross weight carton |
: |
approx. 85 kg |
Oven UN110 Plus |
Stainless steel interior |
Max. loading of chamber |
: |
175 kg |
Dimensions W x H x D in mm |
: |
w(A) x h(B) x d(C): 560 x 480 x 400 mm |
Volume |
: |
108 l |
Textured stainless steel casing |
: |
w(D) x h(E) x d(F): 745 x 864 x 584 mm |
Electrical data |
Voltage |
: |
230 V, 50/60 Hz |
Electrical load |
: |
approx. 2800 W |
Voltage |
: |
115 V, 50/60 Hz |
Electrical load |
: |
approx. 1800 W |
Dimensions approx incl. carton |
: |
B x H x T: 830 x 1050 x 800 mm |
Net weight |
: |
approx. 74 kg |
Gross weight carton |
: |
approx. 99 kg |