MultiRAE Plus 4 Gas Detector RAEsystems With PID
Gas Monitor
|
Range | Resolution |
Oxygen | 0 - 30 % | 0.1 % |
Combustible Gas | 0 - 100 % LEL | 1 % LEL |
Carbon Monoxide | 0 - 500 ppm | 1 ppm |
Hydrogen Sulfide | 0 - 100 ppm | 1 ppm |
VOCs | 0 - 200 ppm | 0.1 ppm |
200 - 2000 ppm | 1 ppm | |
Sulfur Dioxide | 0 - 20 ppm | 0.1 ppm |
Nitric Oxide | 0 - 250 ppm | 1 ppm |
Nitrogen Dioxide | 0 - 20 ppm | 0.1 ppm |
Chlorine | 0 - 10 ppm | 0.1 ppm |
Hydrogen Cyanide | 0 - 100 ppm | 1 ppm |
Ammonia | 0 - 50 ppm | 1 ppm |
Phosphine | 0 - 5 ppm | 0.1 ppm |
Specifications | |
Size
|
4.65" L x 3.0" W x 1.9" H ( 11.8 x 7.6 x 4.8 cm ) |
Weight | 16 oz.with battery ( 454 g ) |
Direct Readout | Oxygen as percentage by volume |
Combustible gas as percentage of lower explosive level ( LEL ) | |
Carbon Monoxide, Hydrogen Sulfide and VOCs as parts per million ( ppm ) | |
High and low values for all gases | |
STEL and TWA values of toxic gases and VOCs | |
Battery and shut down voltage | |
Date, time, elapsed time, temperature | |
Battery | Lithium-ion battery pack with internal smart charging, 120V AC/DC wall adapter |
Operating Hours | 14 hours continuous with Li-ion (typical), unit will run and charge simultaneously |
Display | 2 line, 16 digit LCD with LED backlighting automatically in dim light or alarm condition |
Temperature | -4° to 113 °F (-20 to 45 °C) |
Humidity | 0 % to 95 % relative humidity ( non-condensing ) |
Alarms | 90 dB buzzer and flashing red LED to indicate exceeded preset limits: |
High : 3 beeps and flashes per second | |
Low : 2 beeps and flashes per second | |
High and low values for all gases | |
STEL and TWA : 1 beep and flash per second | |
Additional diagnostic alarms and display messages for low battery and pump stall | |
EM/RFI | Highly resistant to EMI/RFI. Compliant with EMC Directive 89/336/EEC |
IP Rating | IP-55 : protected against dust, protected against low pressure jets of water from all directions |
Data Logging | 80 hours, 5 channels at one minute intervals download to PC with serial number of unit, user ID, site number, and calibration date |
Calibration | Zero & Span Calibration ( programmable ) |
Sampling Pump | 250 cc/min |
Low Flow Alarm | Auto shut-off pump at low flow condition |
Hazardous Area Approval | US and Canada : UL, cUL, Classified as Approval Intrinsically Safe for use in Class I, Division I Groups A, B, C, D, T3C |
Europe: ATEX II 2G EEx ia d IIC T3 & T4 | |
Attachment | Durable yellow boot with belt clip and wrist strap; Shoulder strap; optional tripod/wall mounting bracket |