Moisture Analyzers DAB 100-3 Kern |
||
Features |
Adjusting program ( CAL ) : For quick setting of the balance's accuracy. External adjusting weight required. |
|
Memory : Balance contains memories, e.g. for tare weights, weighing data, item data,PLU etc. |
||
Data interface RS-232 : To connect the balance to a printer, PC or network |
||
GLP/ISO log : with weight, date and time. only with KERN printers, see Accessories |
||
Weighing units : Can be switched to e.g. nonmetric units at the touch of a key. See balance model. |
||
Mains part : mains part integrated in the balance. 230 V/50 Hz Standard type D, if requested also available in standard GB, AUS or USA. |
||
Strain gauge : An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing |
||
1 years warranty |
||
Options |
Calibration certificate possible. The time required for calibration is 3-4 days |
|
Technical data |
Level indicator |
|
Material weighing plate |
Aluminium dish |
|
Overall dimensions mounted (W x D x H ) |
240 mm x 365 mm x 180 mm |
|
Revolving screw feet |
||
Weighing surface ( d ) |
92 mm |
|
Gross weight |
6,100 kg |
|
Net weight |
4,820 kg |
|
Display |
Display digit height |
14 mm |
Display digit height |
6 mm |
|
Power supply |
Input voltage |
230 V AC 50 Hz |
Measuring system |
External calibration |
|
Linearity |
3 mg |
|
Measuring range [ Max ] |
199 °C |
|
Readout [ d ] |
1 mg |
|
Reproducibility |
1 mg |
|
Resolution |
110000 |
|
Stabilisation time |
3 s |
|
Tare range |
110 g |
|
Warm up time |
2 h |
|
Weighing range [ Max ] |
110 g |
|
Weighing system |
Strain gauge |
|
Weighing units |
% Feuchte % Trockenmasse g |
|
Environmental conditions |
Max humidity |
80 % |
Max operating temp. |
40 °C |
|
Min ambient temp |
5 °C |
|
Min humidity |
5 % |